How to Use the FootFitter 1"-3" High Heel Shoe Stretcher
Before You Begin...
1. The toe block (A) must be fully closed. Turn the widening handle (B) counterclockwise to close the toe block.
2. This shoe stretcher comes with 2 spot stretching plugs (C) corns, bunions, and other pressure points. If you need to spot stretch any particular areas, these plugs must be inserted prior to stretching the shoe.
3. This stretcher features a contoured toe block that works best with heels 1-3 inches in height. For heels with a height greater than 3 inches, take a look at our 3"-6" High Heel Stretcher.
Apply shoe stretch spray to the inside of your shoe to relax the material for stretching. You can also wipe the inside of the shoe with a cloth saturated with shoe stretch spray.
If needed, insert the spot stretching plugs into the corresponding plug slots on the toe block prior to stretching.
Insert the toe block into the toe box of your high heel. Make sure to wedge it in far enough that the toe block touches the end of the toe box.
To widen the high heel, turn the widening handle clockwise to expand the toe block. Once snug, turn 2 to 3 more times for a proper stretch.
Once your desired width settings are set, leave the stretcher in your high heel for at least 6 to 8 hours.
To remove the stretcher, turn the widening handle counterclockwise to fully retract the toe block. Pull out slowly.