How to Use the FootFitter Western Cowboy Boot Stretcher

Before You Begin...

1. The toe block (C) must be fully closed. Turn the widening handle (A) counterclockwise to close the toe block.

2. This boot stretcher comes with 2 spot stretching plugs (D) for corns, bunions, and other pressure points. If you need to spot stretch any particular areas, these plugs must be inserted prior to stretching the boot.

3. This device stretches solely the width of the toe box. If you need to stretch the boot's instep or shaft, explore our boot stretchers to find specialized stretchers that will address your needs.

Step-by-Step Guide

Step 1:
Apply shoe stretch spray to the inside of your boot to relax the material for stretching. You can also wipe the inside of the boot with a cloth saturated with shoe stretch spray
Step 2:
If needed, insert the plugs into the corresponding plug slots on the toe block prior to stretching.
Step 3:
Insert the toe block into the toe box of your boot. Make sure to wedge it in far enough that the toe block touches the end of the toe box.
Step 4:
To widen the boot, turn the widening handle clockwise to expand the toe block. Once snug, turn 2 to 3 more times for a proper stretch.
Step 5:
Once your desired width settings are set, leave the stretcher in your boot for at least 6 to 8 hours.
Step 6:
To remove the stretcher, turn the widening handle counterclockwise to fully retract the block. Pull out slowly.